A REACH test report is an essential compliance document that verifies whether a product meets the chemical substance requirements of Regulation (EC) No 1907/2006 for placement on the European Union market. This technical guide explains the scope of REACH testing, typical sample types, analytical methods for Substances of Very High Concern (SVHC) and Annex XVII restricted substances, and practical answers to frequently asked questions. Understanding the structure and content of a REACH test report is critical for manufacturers, importers, and suppliers seeking smooth customs clearance and supply chain acceptance.
Technical Overview
REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) is a European Union regulation that entered into force on June 1, 2007, and is administered by the European Chemicals Agency (ECHA). The regulation applies to chemical substances on their own, in mixtures, and in articles, making it relevant not only to chemical producers but also to manufacturers and importers of finished goods such as consumer products, electronics, toys, textiles, and automotive components.
A REACH test report is a document issued by an accredited third-party laboratory that presents the analytical results of testing performed on a product or material against the relevant REACH requirements. The two principal technical bases for testing are the SVHC Candidate List and Annex XVII of the regulation. The Candidate List identifies Substances of Very High Concern, and Article 33 of REACH requires suppliers of articles containing more than 0.1% (weight by weight) of any listed SVHC to provide sufficient information to allow safe use of the article. Annex XVII, by contrast, defines specific restrictions and concentration limits for certain hazardous substances, mixtures, and articles.
Because the SVHC Candidate List is updated approximately twice per year and now contains more than 240 entries, a REACH test report must clearly state the version of the list against which the testing was performed, the date of issue, and the applicable regulatory references. A well-structured report typically includes laboratory accreditation information, sample descriptions, test methods, detection limits, and a clear pass or fail conclusion for each regulated substance.
Testing Samples
REACH testing is performed on homogeneous materials, meaning each distinct material in a product may need to be evaluated separately. The most common sample categories submitted to accredited third-party laboratories include the following.
Plastics and Polymeric Materials
Plastic components are routinely screened for phthalate plasticizers such as DEHP, DBP, BBP, and DIBP, as well as flame retardants, bisphenol compounds, and short-chain chlorinated paraffins. Samples are typically taken from housings, cables, films, gaskets, and internal components.
Metals and Alloys
Metallic parts are tested for restricted elements including lead, cadmium, and hexavalent chromium. Items with prolonged skin contact, such as jewelry, watches, eyewear frames, and garment fasteners, additionally require nickel release testing in simulated perspiration conditions.
Textiles, Leather, and Footwear
Textile and leather samples are analyzed for azo dyes that may release carcinogenic aromatic amines, formaldehyde, chromium VI in leather tanning, organotin compounds, per- and polyfluoroalkyl substances (PFAS), and dimethylformamide residues.
Electronics and Electrical Products
Electrical and electronic assemblies are tested for SVHC substances that overlap with related directives, including specific phthalates, brominated flame retardants, and boron compounds found in laminates, solder masks, connectors, and insulation materials.
Coatings, Inks, and Adhesives
Paints, printing inks, surface coatings, and adhesive layers are evaluated for restricted solvents, formaldehyde-releasing agents, lead-containing driers, and other regulated organic compounds that may migrate from the finished article.
Testing Items
The scope of testing in a REACH test report depends on the material composition of the product and the applicable regulatory entry. Common testing programs include the following.
- SVHC screening against the current ECHA Candidate List, reporting each substance with its CAS number, method detection limit, and measured concentration.
- Phthalate content testing for DEHP, DBP, BBP, and DIBP in plasticized materials, with restriction limits of 0.1% by weight for each substance in consumer articles.
- Heavy metal analysis for lead, cadmium, and their compounds under the relevant Annex XVII entries.
- Nickel release testing for articles in direct and prolonged contact with the skin, with a limit of 0.5 µg/cm² per week for pierced parts and post assemblies.
- Azo dye testing for reductive cleavage to carcinogenic amines, with a limit of 30 mg/kg per amine in textile and leather articles.
- Polycyclic aromatic hydrocarbon (PAH) testing, typically covering eight regulated PAHs with limits of 1 mg/kg for consumer products and 0.5 mg/kg for toys and childcare articles.
- Chromium VI determination in leather articles, with a limit of 3 mg/kg.
- Organotin compound analysis, including dibutyltin (DBT), dioctyltin (DOT), and monomethyltin derivatives used as PVC stabilizers.
- Short-chain chlorinated paraffin (SCCP) and medium-chain chlorinated paraffin (MCCP) screening in plastics, rubber, and coating formulations.
- Bisphenol A determination in thermal paper, polycarbonate materials, epoxy coatings, and food-contact articles.
Testing Methods
Accredited third-party laboratories apply validated analytical techniques selected according to the substance class, matrix, and regulatory limit. Sample preparation generally involves cutting, milling, or cryogenic grinding to achieve a homogeneous test portion, followed by solvent extraction or acid digestion.
- Gas chromatography coupled with mass spectrometry (GC-MS) is used for phthalates, PAHs, azo dye cleavage amines, organotin compounds, and volatile organic substances, with detection limits typically at or below 5 mg/kg.
- Inductively coupled plasma optical emission spectrometry (ICP-OES) and inductively coupled plasma mass spectrometry (ICP-MS) are used for total content determination of heavy metals such as lead and cadmium, with detection limits in the low mg/kg range.
- Ultraviolet-visible spectrophotometry (UV-Vis) is applied to colorimetric determinations, including formaldehyde analysis by the acetylacetone method and chromium VI quantification through diphenylcarbazide complexation.
- High-performance liquid chromatography with diode-array or mass spectrometric detection (HPLC-DAD, LC-MS) is used for bisphenols, benzotriazoles, and thermally labile compounds.
- X-ray fluorescence spectrometry (XRF) is used as a rapid screening tool for elemental composition prior to confirmatory wet-chemical analysis.
- Ion chromatography supports the determination of specific anionic species and extractable halides where required.
Reports distinguish between total content analysis, which quantifies the entire amount of a substance in the material, and migratable or extractable content, which simulates release under defined exposure conditions. The appropriate approach depends on the wording of the specific Annex XVII entry or the SVHC notification requirement.
Applications
REACH test reports serve multiple commercial and regulatory purposes across the product lifecycle.
- EU market access: Importers and customs authorities may request test evidence demonstrating compliance with SVHC communication duties and Annex XVII restrictions.
- Supply chain communication: Downstream customers routinely require current test reports as part of supplier qualification, purchase agreements, and vendor audit programs.
- E-commerce platform requirements: Major online marketplaces operating in the EU request REACH compliance documentation for chemical-relevant product categories.
- Product development: Early material screening helps engineering teams select compliant polymers, coatings, and additives before tooling investment.
- Risk management and due diligence: Test reports provide documentary evidence of reasonable diligence in the event of market surveillance actions or product recall proceedings.
- Overlapping compliance programs: REACH results frequently support declarations for related frameworks, including RoHS, toys safety standards, and food contact material regulations, where substance scopes intersect.
FAQ
What is the 0.1% SVHC threshold?
The threshold of 0.1% weight by weight applies per article or per homogeneous material depending on the interpretation applied by the importing member state. If an SVHC is present above this level, the supplier must provide the customer with sufficient information for safe use, and notification to ECHA may be required under Article 7 if the substance quantity exceeds one tonne per year per producer or importer.
How long is a REACH test report valid?
There is no fixed statutory validity period. In practice, reports are considered current for approximately one year, or until the SVHC Candidate List is updated, whichever occurs first. Because the list grows twice per year, most supply chains require re-evaluation or gap testing after each update.
What is the difference between SVHC testing and Annex XVII testing?
SVHC testing screens broadly against the Candidate List to support communication and notification duties, while Annex XVII testing targets specific substances with legally binding concentration limits and use conditions. A failed Annex XVII limit means the product cannot legally be placed on the EU market in that configuration, whereas SVHC presence above 0.1% primarily triggers information and notification obligations.
Which parts of a product should be tested?
Testing should focus on homogeneous materials likely to contain regulated substances, such as plasticized polymers, coatings, adhesives, dyed textiles, and metal surface treatments. A material-based assessment performed by an accredited third-party laboratory can prioritize high-risk components and reduce unnecessary analytical cost.
Can one report cover the entire Candidate List?
Laboratories offer targeted SVHC screening packages that cover the substances most likely to occur in a given product category. A risk-based approach, supported by material declarations and supplier data, is generally more practical than exhaustive testing of every listed substance.
How is REACH different from RoHS?
REACH applies to virtually all consumer and industrial articles placed on the EU market and covers a broad, dynamically updated substance list, while RoHS restricts ten specific substance groups in electrical and electronic equipment. The two regimes overlap for phthalates and certain heavy metals, and compliant products typically require coordinated documentation for both.
Why Choose ZKGX?
- State-of-the-art analytical equipment
- Highly qualified scientific team
- Fast turnaround time
- Competitive pricing